RoughDeck BDP
Drum Weigher
When flexibility is required for weighing large items such as barrels and drum pallets, the RoughDeck® BDP’s low profile design and optional hinged access ramps enable effortless loading and unloading. Live side rails permit items exceeding the standard scale dimensions to be weighed accurately where they sit on the scale. Design feature options include treaded mild steel or smooth stainless steel top plates, and environmentally sealed or welded-seal load cells catering to a vast range of application conditions.
All of our floor scales, unless specified otherwise, are built with lifting holes to assist our dealers during installation, or to later service the scales. The lifting holes are not the same size on all of our scales and in the PDF below, you will find a chart that lists the standard size and quantity of eyebolts needed for our scales.
Features
Specifications
- Live siderails
- Top access foot adjustment holes (holes are 1/2-13 threaded for lifting scale)
- Four adjustable stainless steel SUREFOOT™ support feet
- 30 in x 31 in or 36 in x 37 in weighing surface (not including side rails)
- TuffSeal® JB4SS stainless steel, NEMA 4x junction box with signal trim card
- Three-year limited warranty
Mild Steel Models
- Treaded top plate
- Alloy steel load cells (RL35023)
Stainless Steel Models
- Smooth top plate
- Stainless steel or stainless steel with welded-seal (IP67) load cells
End Load Capacity
- 1000 lb: 100% full scale
- 2500 lb: 80% full scale
Cable Length
10 ft (3m)
Threaded Eyebolt
Hole (1/2-13NC) located in center of deck for easy lifting
Warranty
RoughDeck BDP weldment three years, load cells two years, all other components one year
Approvals
- NTEP CC 03-060, Class III 2,500d
- Measurement Canada AM-5578
- (500 kg) Class III 2,500d
- (1000 kg) Class III 2,000d