460 Series
Indicators/Controllers
For applications that require an elevated level of flexibility over elementary weighing indicators, the Model 460 and 465 Indicators are the perfect solution.
GSE 460 series was designed to outperform and outlast all comparable indicators, the model 460 from Avery Weigh-Tronix offers unparalleled performance and value. Equipped with the industries most sophisticated parameter map and programmable features, the 460 series indicators deliver easy to use operation with the flexibility to meet your application requirements now and in the future.
Features NEMA 4X, IP66 design and durable elastomeric rubber 5 Keys on front. (Zero, Print, Units, Tare, Select). Bright 6 digit .75\\\" (20 3mm) Vacuum Florescent (VFD) with 2x5 (10 character) dot matrix for scale status and operator prompting. For communications, Port 1: RS232 Full Duplex serial port or RS 485 or 20 mA optional and Port 2 : RS232 Full Duplex, no RTS on COMM 2.
Options Available Include
- Analog Output Module: 0-10 VDC, 20mA, 4-20 mA, optically isolated, Software adjustable zero/gain (2 analog modules max.)
- Multi-scale Module: allows for simultaneous monitoring of an additional signal input
- RS485 Module: Isolated multi-drop with 251 devices max, half or full duplex up to 4000 feet, 56K bps max
- 20mA Current Loop: Isolated TX-Active or Passive, RX-Passive, 9600 bps max, 12VDC, 1000 foot loop
- DeviceNet™: ODVA approved interface module for fieldbus networking
- Profibus: PTO approved interface module for fieldbus networking
- Ethernet: Communication via intranet or internet connection
Features
Specifications
Applications
Available Models
- Check Weighing Routines
- Filling and Batching
- Multi-Range Scale Indication
- Peak Weight Hold
Electrical
- Power Requirement: AC 90–250 VAC/50/60 Hz DC 10–32 VDC
- Excitation Voltage: 10 VDC, short circuit protected Max.
- Excitation Current: 350 mA, powers (12) 350 ohm weight sensors Fuse: 0.8A Slow–Blow (when using AC power)
- Signal Input Sensitivity: 0.1–20 mV/V
- Signal Connection: 4 or 6 lead with sense leads Performance Full Scale (F.S.): Selectable 0.01 to 999,990 A/D
- Conversion: 60 Hz Resolution: 20 bit A/D converter, 100,000d displayed, 1,000,000 internal
- Zero Track: Off–20d Zero Range: Selectable, 0.01-100%
- Full Scale Non–Linearity: 0.005%
- Full Scale, Load Cell dependent
- Operating Temperature: -10° C to +40° C
- Units of Measure: 4 user defined per scale
- Custom Units: 2 user defined per scale
- Time/Date Clock: Volatile, battery backed optional
Keypad
- 460: Durable elastomeric rubber 5 Key (Zero, Print, Units, Tare, Select)
- 465: Durable elastomeric rubber 22 key (Zero, Print, Units, Tare, Select, Enter, Scale Select, Clear, 1 Function, Target, ID and Full Numeric)
Display
- VFD: Bright 6 digit .75” (20 3mm) Vacuum Florescent (VFD) with 2x5 (10 character) dot matrix for scale status and operator prompting
Communications
- Port 1: RS232 Full Duplex serial port or RS 485 or 20 mA optional
- Port 2 : RS232 Full Duplex, no RTS on COMM 2
- Protocols: Modbus™, (DeviceNet™, Profibus, Ethernet optional)
- Baud Rate: 150–58,300 bps
- Custom Transmit Tables: 4–user defined RS232 output tables
- Input Interpreter Tables: 15–user defined RS232 input tables
Process Control
- I/O Scan Rate: 16 ms maximum
- Number of I/O: 16 total (8 physical–optional, 6 logical–software)
- Remote Input: 2 total of TARE, PRINT, ZERO, START, STOP–Invokes macros 6 & 7 if programmed
Enclosure
- Stainless Steel: NEMA 4X, IP66 design
- Shipping Weight: 7 lb. Approvals ƒ NTEP COC# 01-031 ƒ PTB ƒ CE ƒ
- Canadian Weight and Measures AM-5417 ƒ ETL
- Truck Weighing Programs
- Checkweighing Routines
- Parts Counting and Inventory Control
- Filling and Batching
- Mult-Range Scale Indication
- Peak Weight Hold